Peugeot 406

Since 1996 of release

Repair and car operation

Peugeot 406
+ 1. The maintenance instruction
+ 2. Maintenance service
+ 3. The engine
+ 4. Systems of cooling, heating and ventilation
+ 5. Fuel system
- 6. Ignition system
   - 6.1. Start and gymnastics systems
      6.1.1. The accumulator
      6.1.2. Gymnastics system
      6.1.3. The alternating current generator
      6.1.4. System of start of the engine
      6.1.5. A starter
      6.1.6. The gauge of pressure of oil
      6.1.7. The gauge of level of oil
   + 6.2. Ignition system (petrol engines)
   + 6.3. System of prestarting heating (diesel engines)
+ 7. Coupling
+ 8. Transmissions
+ 9. Power shafts
+ 10. Brake system
+ 11. A suspension bracket and a steering
+ 12. A body
+ 13. An electric equipment
+ 14. The basic malfunctions

6.1.6. The gauge of pressure of oil
Removal

PERFORMANCE ORDER

1. The gauge is located on the forward party of the block of cylinders over the oil filter.

2. Disconnect the negative plug of the accumulator.

3. Remove the protective cover closing an electric socket of the gauge, and disconnect a socket.

4. Unscrew the gauge from the block of cylinders and muffle an aperture a corresponding stopper.

Installation

PERFORMANCE ORDER

1. Check up consolidation of the gauge and if necessary replace.

2. Screw in the gauge in the block of cylinders and tighten the corresponding moment.

3. Connect to the gauge an electric socket.