Peugeot 406

Since 1996 of release

Repair and car operation



Peugeot 406
+ 1. The maintenance instruction
+ 2. Maintenance service
+ 3. The engine
+ 4. Systems of cooling, heating and ventilation
+ 5. Fuel system
+ 6. Ignition system
+ 7. Coupling
+ 8. Transmissions
+ 9. Power shafts
+ 10. Brake system
+ 11. A suspension bracket and a steering
- 12. A body
   12.1. The general information
   12.2. Care of a body
   12.3. Care of an upholstery and rugs
   12.4. Repair of insignificant damages of a body
   12.5. Repair of strong damages of a body
   12.6. A forward bumper
   12.7. A back bumper
   12.8. A cowl
   12.9. A cable of the lock of a cowl
   12.10. The cowl lock
   12.11. Doors
   12.12. A door upholstery
   12.13. The lock and handles of opening of a door
   12.14. Glasses of doors
   12.15. A luggage carrier cover
   12.16. The luggage carrier lock
   12.17. A back door
   12.18. The lock of a back door
   12.19. System of the central blocking
   12.20. Electric стеклоподъемники
   12.21. External rear-view mirrors
   12.22. Front and back has flown down
   12.23. The hatch
   12.24. Overlays and emblems
   12.25. Seats
   12.26. The mechanism of a tension of a seat belt of a forward seat
   12.27. Seat belts
   12.28. Salon furnish
   12.29. The central console
   12.30. The panel of devices
+ 13. An electric equipment
+ 14. The basic malfunctions



12.18. The lock of a back door

Removal and installation

PERFORMANCE ORDER
1. Remove the negative plug from the accumulator.
2. Open a back door, unscrew screws and remove the internal handle of a door.
3. Using a screw-driver, remove a decorative overlay of the internal button.
4. Remove percussion caps of fastening of an upholstery of a back door.
5. Remove an internal upholstery of a back door.
The lock
6. Unscrew screws of fastening of the lock (a photo at the left), remove from the lock of draught and take the lock from a back door (a photo on the right).
The cylinder of the lock of a back door
7. Disconnect скобу and separate draught from the lock.
8. Disconnect an electric socket from the engine of the central blocking of doors (a photo at the left), unscrew bolts and take the lock from a back door (a photo on the right).
The internal button of the lock
9. Remove the lock of a back door. Pay attention that the lock is connected to the button draught which is necessary for disconnecting from the lock and to take from a back door.
10. Release скобы fastenings and remove the button of the lock of a back door.
11. Installation is made in sequence, return to removal.